The hoisting and positioning of CNC lathe shall use the special hoisting materials provided by the manufacturer, and other methods shall not be used. No special lifting equipment is required. The steel wire rope shall be hoisted in place according to the direction specified in the instructions. The CNC lathe shall be installed on a solid foundation, and its orientation shall be far away from the source; it shall be protected from sunlight and heat radiation; it shall be placed in a dry place to prevent moisture and air flow. If there is a source near the CNC lathe, anti vibration ditch must be set around the foundation.
The CNC lathe shall be placed on the foundation and shall be in free horizontal condition, and then the anchor bolts shall be determined uniformly. For general machine tools, the horizontal reading shall not exceed 0.04 ≤ 1000 mm, and for high-precision machine tools, the horizontal reading shall exceed 0.02/1000 mm. When measuring the installation accuracy, it should be carried out under the constant temperature condition, and the measuring things should be used after a fixed temperature time. In order to prevent the forced deformation of the machine, the machine should be equipped. When installing CNC lathe, some parts of the lathe should not be disassembled at will. The disassembly of the parts will lead to the new important distribution of the internal stress of the machine tool, and then affect the accuracy of the machine tool