Precautions for the use of plate cutting machine
In the current furniture industry market, the use of CNC cutting machines is becoming more and more widespread. It is precisely because of the promotion and use of this equipment that the processing efficiency of many customers has also been greatly improved, and most of the manpower has also been reduced. and physical resources. However, some unavoidable conditions will inevitably occur during the operation of the equipment, which requires us to spend some time maintaining our equipment, and we must also pay attention to some matters during use, so as to extend the service life of the equipment.
1. Set different processing parameters according to different materials
At present, custom-made panel furniture commonly has different panels such as solid wood boards, density boards, multi-layer boards, and particle boards, and the hardness of these boards is also different. This requires us not to set the processing speed too high, otherwise it will be It is easy to cause damage to the tool or chipping of the material. Therefore, it is very important for us to set different processing parameters according to different materials.
2. The ground wire must be connected correctly
The connection of the power distribution cabinet of the cutting machine to the ground wire can effectively prevent electrostatic interference. Once the electrostatic interference is strong, it is easy to cause errors in the signal transmission of the control system, resulting in large errors in machine processing, and it is also prone to failures such as machine running tools. Therefore, it is an essential step to connect the ground wire of the electric cabinet before starting the operation.
3. The importance of vacuum adsorption pump maintenance
Since most of the processed materials are plates, the adsorption force of the vacuum adsorption table on the machine will be very high. Some adsorption pumps need to be water-cooled. When the temperature is low in winter, it is necessary to ensure that the adsorption pump will not freeze due to low temperature, otherwise it will increase the volume and damage the adsorption pump and affect production. Therefore, simple maintenance should be carried out on the adsorption pump after normal use.
4. Daily maintenance of cutting machine
In addition to the above precautions, the usual maintenance of machinery and equipment is also very important. After daily use, it is necessary to remove dust from each component of the machine, such as the daily cleaning of important components such as the chassis and spindle, and maintenance work must be done well. The processing tool can also be removed and wiped clean to allow the spindle head to relax.
This is of great help to prolong the service life of the spindle head, and then we have to start cleaning the work surface, using a brush to clean the dust and debris on the surface. Note that it is usually best not to accumulate sundries on the work surface to avoid deformation of the platform. Finally, move the nose to the sitting or lower right position to stop to prevent collision, and then cut off the power. The last thing is to always check whether the screws of the equipment are loose. If there is looseness, it will easily lead to accuracy errors.
From this point of view, how important is the maintenance of machinery and equipment at ordinary times, so in order to make the machine use longer, and in order not to affect the processing efficiency, we must remember to perform irregular maintenance on the machine after use. Finally, if you don’t understand the cutting machine equipment or the precautions for use, if you need to know more, please contact us to help you solve your problems!
If you have any need, please feel free to contact us:
Whatsapp/Phone Mobile: +8613588105985 Email:info@ulicnc.com