With the wide application of stone engraving machines, more and more customers who have just started to understand CNC stone engraving machines often ask: "How about the speed of engraving and how long does it take to engrave one square?"
There are many factors in the speed of engraving. The first thing that cannot be denied is the configuration of the machine itself and the power of finishing. There is also the proficiency of the technology, the choice of tools, the material of the stone, etc. The detailed breakdown is as follows:
1.Theoretical basis: The training work must start from theoretical training, and the operator must be able to carry out practical operation training after passing the theoretical examination. If the theoretical training fails, operation training must not be carried out.
2. The use of stone engraving machine knives: after theoretical training, knives must be trained. The operator must be aware of common tools, engraving motor speed, travel speed, precautions, etc., and the operator must be familiar with the application of the tool.
3. The scope of application of stone: the operator must be familiar with the scope of application of various materials, be familiar with different materials, different thicknesses, and different finished product sizes. Familiar with different engraving methods of different materials.
4. The operation of various software of the stone engraving machine: software training can be carried out after passing the above training. Software training is mainly concentrated in the field of user application; the requirements of the software are: various types of software, various operations, path generation, and the ability to quickly find path errors.
The continuous operation time is less than 10 hours per day to ensure the cleanliness of the cooling water and the normal operation of the water pump. Never make the water spindle motor lack water. Replace the cooling water regularly to prevent excessive water temperature. If the working environment temperature is too low in winter, the water in the water tank can be replaced with antifreeze.
Every time the machine is used, pay attention to cleaning. Be sure to clean up the dust on the platform and transmission system, and regularly (weekly) lubricate the transmission system (X, Y, Z axis). (Note: The X, Y, Z three-axis polished rods should be maintained with engine oil; add high-speed butter to the screw rod; if the working environment of the automatic computer engraving machine is too low in winter, the screw and polished rod (square rail or round rail) part should Wash and clean with gasoline, and then add oil, otherwise it will cause excessive resistance in the transmission part of the machine and cause the machine to displace.)
protect electrical appliances
The maintenance inspection is to cut off the power supply, and the computer woodworking engraving machine can be carried out after the monitor has no display and the main circuit power indicator light goes out.