The hardness of the stone is higher, and the requirements for the engraving machine are also higher than other engraving materials. Therefore, relatively speaking, the performance of the stone engraving machine is also very high. Stone engraving machine can be used for stone lettering, stone relief, stone Yang carving, stone Yin carving, stone line carving, stone cutting, stone hollowing, suitable for carving and manufacturing of tombstone carving, stone carving crafts and other workpieces. With the increasing number of users of CNC engraving machines, stone engraving machines have also received more attention.
Due to the influence of the working environment, the motor spindle of the stone engraving machine will rust. If it is not treated for a long time, the life of the spindle motor will be shortened and the use of the stone engraving machine will be affected. The following will introduce the solution to the rust of the spindle of the stone engraving machine.
1. Derusting by physical methods: Removing rust, oxide scale, etc. on the surface by hand knocking, shoveling, scraping, brushing, sanding or flexible filing. This is a radical rust removal method for painters. Head hammer, wire brush, emery cloth, broken saw blade and other tools are also the easiest method.
2. Chemical rust removal: You can use WD-40 cleaning lubricant, spray it evenly on the motor, and wipe off the rust on the stone engraving machine with a cotton cloth in about half an hour. If the rust is severe, you can do it several times. WD-40 is non-conductive and has a good lubricating effect.
The above is the method of dealing with the rust of the stone engraving machine, and we must pay more attention in the ordinary application.