I believe that everyone has heard of NC cutting machines, and also understand that using NC cutting machines can help us cut things faster and cut well, but there is a premise that we must be proficient in using NC cutting machines. I will introduce them below. How to use CNC cutting machine.
Before using the CNC cutting machine, we need to place an iron plate to be cut on the material rack. It should be noted that the material rack needs to be particularly horizontal and cannot be of different heights. The iron plates must also be parallel. You can follow the track of our CNC cutting machine to find the parallel.
Before work, we need to check the use of the CNC cutting machine, if there is a problem, we must determine that there is no problem before we can turn on the machine to avoid accidents, and then check the walking track to confirm that there are no obstructions to start normal use.
If it is a dual-purpose cutting machine, it is divided into a plasma cutting machine and a flame cutting machine. We need to look at the thickness of the cut iron plate to decide which cutting method to use. Both types have their own advantages. You can choose your own. Switch on the device. If it is a method of use, this step can be ignored.
Open the CNC system, select graphics management, find the graphics we need to cut, then set the size to be cut, and confirm.
If we need cutting graphics not in this system, this requires us to use drawing software to draw pictures, and then use nesting software to nest.
When nesting, we can adjust the cutting sequence. The designated function above is to set the size according to your iron plate, arrange the graphics, and then save it. USB flash drive, then insert the USB flash drive into the CNC system for reading. After everything is ready, press the start button on the CNC cutting machine, that is, the START button, and start cutting.
