Tool maintenance and grinding is also a very important issue. When a job is finished, no matter how tired, you should put the tools in place first, and then take a rest. If you want to use them again after a period of time, you should repair the tools, or apply oil (to prevent moisture and rust), and put them into the toolbox or tool bag by category, so as to be used next time. The cutter of carving machine is like the hands of a man. If he doesn't cherish him, he can't do fine work. Let's talk about how to maintain the cutting tools.
First, the size of the jacket should be appropriate. The jacket with cross-section, wear, not round enough, and taper of the inner hole must not be selected. Otherwise, it will cause the vibration of the tool handle and not achieve the ideal carving effect.
Secondly, the contact between the second jacket and the handle should be gentle. The handle should not only be firmly inserted into the jacket, but also tightened. If the inner hole of the jacket is deformed after a long time of use, the jacket must be replaced immediately.
Thirdly, the toughness of the tool should be checked frequently. If it is blunt, it should be replaced immediately, because if it is used continuously, the carving effect will not be good and the knife will be broken.
Fourth, wood engraving machine use to pay attention to the processing thickness can not exceed the cutting edge of the thickness, otherwise there will still be broken knife.
Fifthly, reasonable cutting speed should be used for cutting different materials.
Sixth, the cutting speed should be kept balanced, and the speed should be consistent as far as possible, in order to achieve better results, the cutting process can not stay, the correct use of woodworking engraving machine tools should be done in one go.
Seventh. Special cleaning agent should be used to remove dirt from the cutting tool.