ULI Edge Banding Machine
1.Pre-milling equipment with double trim-blades works on the waved effect that is caused by precise saw.
2..The glue mechanism adopts a special structure to gelatinize the plates and coating materials uniformly, ensure a more solid conglutination.
3.Rough &Fine Trimming unit, with two individual high frequency motors, trim the exceeding edge on the top and bottom side of the panel, ensure the top and bottom side of the edge smooth and even.
4.The buffing device adopt the board processed by cotton polishing wheel, by end-polishing to make a more smooth surface.
5.Scraping unit for a perfect finishing of the applied edge.
- It is mainly used for PVC and acrylic edge banding of panel furniture, and it is better to use edge banding of 0.8mm thick or more.
- Pre-milling: re-modification of the ripples, burrs or non-perpendicular phenomena caused by the sawing of the panel saw/cutting saw with a double milling cutter
- Glued edge banding: double-sided coating evenly
- Flush: Automatic model tracking and high-speed high-speed motor rapid cutting structure
- Refinement:R-shaped knife
- Scratch edge: used to eliminate the ripples caused by the cutting process of trimming non-linear motion
- Polishing: It is used to clean and process the plate with cotton polishing wheel to make the edge of the edge seal smoother.
- Slotting: It can be used for directly grooving the side panels, bottom plates, etc. of the wardrobe, and can also be used for slotting the aluminum edging of the door panel.
|Dimensions||5966x1000x1600 mm||234.88″ *39.37″ *63″|
|Feed rate||12m/16m/23m/min||472/630/905 in/min|
|Edge banding machine thickness||0.4-3 mm||0.016″ -0.12″|
|lSheet thickness||10-60 mm||0.39″-2.36″|
|Sheet length||≥150 mm||≥5.9″|
|Sheet width||≥ 80 mm||≥3.15″|
Hot Tags: edge banding machine, China, manufacturers, factory, price